Roland VersaCamm SP-540V Service Notes page 136

[AUTOMATIC ADJUSTMENT]
Setup the Vinyl Sheet (note : Vinyl should be black and
8
the backing should be white.) on the Machine.
Turn on the sub power switch while pressing [ ], [ ]
and [ ] keys to enter the SERVICE MODE.
Select [AUTO] under the [CROP-TOOL ADJ.] menu.
9
Crop Mark will be cut when the [ENTER] key is pressed.
While the Vinyl is still set on the Machine, peel off the
10
Crop Mark being cut when the message shown in the
right figure is displayed on the LCD.
Then, press the [ENTER] key.
TOOL / CROP MARK SENSOR ADJUSTMENT will be
11
done automatically.
[ ], [
Menu
SERVICE MENU
MENU
SERVICE MENU
SERVICE MENU
CROP-TOOL ADJ.
CROP-TOOL ADJ.
AUTO
CROP-TOOL ADJ.
REMOVE CROPMARK
CROP-TOOL ADJ.
4-39
], [ ] + POWER ON
[ MENU ] key
[ENTER]
[ENTER]
COMPLETED
4