Roland VersaCamm SP-540V Service Notes page 95

Fix the CABLE GUIDEs on the RAIL with the rivets.
13
Connect the FLEXIBLE CABLE to CN6 of the SERVO
14
BOARD.
Pull the FLEXIBLE CABLE rightward with holding the INNER CABLE GUIDE at the left side so that the
15
FLEXIBLE CABLE fits to the INNER CABLE GUIDE.
If the FLEXIBLE CABLE is not pulled enough or pulled too much, there will be the slack in the CABLE
GUIDE.
OK
NG
NG
TOOL CARRIAGE BOARD
INNER CABLE GUIDE
FLEXIBLE CABLE is not pulled enough.
FLEXIBLE CABLE is pulled too much.
3-50
CABLE GUIDE (Upper)
CABLE GUIDE (Lower)
SERVO BOARD
FLEXIBLE CABLE