Roland VersaCamm SP-540V Service Notes page 109

CUTTING GROUP
Item
CUTTING TIME
DISCONNECT
CLEAR ALL
INK GROUP
Item
CARTRIDGE 1
CARTRIDGE 2
CARTRIDGE 3
CARTRIDGE 4
CHANGE INK
CLEAR ALL
HEATER GROUP
Item
PRINT USE TIME
PRINT ON TIME
PRINT ON COUNT
DRYER USE TIME
DRYER ON TIME
DRYER ON COUNT
CLEAR ALL
4
ERROR GROUP
Item
SERVICE CALL
S-CALL HISTORY
MOTOR ERROR F
MOTOR ERROR S
LOW TEMP.ERR.
HIGH TEMP.ERR.
PROTECT PUMP
EMERG. CAPPING
START UNCAPPED
HEATER VOLTAGE
I/C IC ERR
CLEAR ALL
SYSTEM GROUP
Item
POWER ON COUNT
POWER ON TIME
SLEEP TIME
SHEETCUT COUNT
CLEAR ALL
Contents
Total time of cutting performed
Number of times the cutting carriage is disconnected from printing carriage.
Clear all the values in the CUTTING GROUP.
Contents
Number of times the Ink Cartridge 1 has been changed.
Number of times the Ink Cartridge 2 has been changed.
Number of times the Ink Cartridge 3 has been changed.
Number of times the Ink Cartridge 4 has been changed.
Number of times the Ink Type has been changed.
Clear all the values in the INK GROUP.
Contents
Total hours the print heater has been used.
Total hours the print heater has been on.
Total hours the print heater has been powered on.
Total hours the dryer has been used.
Total hours the dryer has been on.
Total hours the dryer has been powered on.
Clear all the values in the HEATER GROUP.
Contents
Number of times the Service Call has occurred.
Service Call Number in the last 5 times.
Number of times the Servo Error (Feed Motor) has occurred.
Number of times the Servo Error (Scan Motor) has occurred.
Number of times the Low Temperature Error has occurred.
Number of times the High Temperature Error has occurred.
Number of times the Protect Pump Error has occurred.
Number of times the Emergency Capping Error has occurred.
Number of times the machine starts with the uncapped.
Number of times the Heater Voltage Error has occurred.
Number of times the ink cartridge IC system is unusual.
Clear all the values in the ERROR GROUP.
Contents
Number of times being powered on.
Total times that the machine has been on.
Total times that the machine has been in sleep mode.
Number of times the Sheet Cut has been performed,
Clear all the values in the SYSTEM GROUP.
4-12
Unit Reference
hours
Time of the test print is not included.
times
Unit Reference
times
times
times
times
times
Unit Reference
hours
hours
times
hours
hours
times
Unit Reference
times
No.
times
times
times
times
times
Number of times it is capped
compulsorily to protect the head
times
from drying up when the head is
out of the cap more than 10 min..
times
times
Number of times disconnection, or
an error occurs when an ink
times cartridge IC system causes
abnormalities and it becomes
impossible to read information from
Unit Reference
times
hours Sleep time is not included.
hours
It counts Auto Sheet Cut performed
times
both by command and panel.