Roland VersaCamm SP-540V Service Notes page 123

[ HORIZONTAL ADJUSTMENT ]
Select the [HORIZONTAL] > [TEST PRINT] in the
18
[HEAD ADJUST] menu and press the [ENTER] key.
4
Following TEST PATTERN will be printed.
19
Find the position where the block of M and Y color matches that of the K and C color and check the number.
In case of having problem deciding the number, the number between the 2 numbers can be selected.
The number with
DT3,High
DT1,High
DT3,Low
DT1,Low
Select [DT1] and [DT3] in the [HORIZONTAL] menu and
20
enter the parameters checked at 19 with [
Press the [ENTER] key to save the settings.
Parameters can be entered
with an increment of 0.5.
is the current setting.
H2
-20 -6 -5
H2
-20 -6 -5
H2
-20 -6 -5
H2
-20 -6 -5
] and [
-4 -3 -2 -1 0 +1
-4 -3 -2 -1 0 +1
-4 -3 -2 -1 0 +1
-4 -3 -2 -1 0 +1
HEAD ADJUST
HORIZONTAL
] keys.
4-26
SERVICE MENU
HEAD ADJUST
[ ]
HEAD ADJUST
HORIZONTAL
[ ]
HORIZONTAL
TEST PRINT
[ ]
+2 +3 +4 +5 +6
+2 +3 +4 +5 +6
+2 +3 +4 +5 +6
+2 +3 +4 +5 +6
HORIZONTAL
TEST PRINT
HORIZONTAL H2
DT1 LOW
HORIZONTAL
H2
DT3 LOW
HORIZONTAL H2
DT1 HIGH
HORIZONTAL H2
DT3 HIGH
+20
+20
+20
+20
2
2
2
2