Roland VersaCamm SP-540V Service Notes page 176

Wide format printer
Hide thumbs Also See for VersaCamm SP-540V:
Table of Contents

Advertisement

Operations
Check the Remaining Ink Level
When Not in Use for a Prolonged Period.
!! IMPORTANT !!
Even when the machine is not in use, keep it in an environmental where the temperature is
5 to 40 degrees C (41 to 104 degrees F) and the humidity is 20 to 80% (with no consideration).
Be especially careful not to expose the machine to high temperature of 40 degrees C
(104 degrees F) or more.
Recording the Amount of Remaining Media
!! IMPORTANT !!
Default value in the Set Length menu is 0. The amount remaining is not displayed when the setting is 0.
The amount of media remaining is not updated automatically when you change the media. Redo the setting.
The remaining amout that is displayed is only an estimate, and its acuracy is not assured.
Maintenance
Replace the Ink Cartridge
!! IMPORTANT !!
Once an ink cartridge has been installed, never remove it until the ink has been used up,
except when moving the machine.
Frequent insertion and removal may cause air to enter the ink tube, resulting in missing dot
or other problems in printing quality.
Clean the Printing Head
Explain that the machine will display [PRESS THE POWER KEY TO CLEAN] message
if the machine is left without using for 1 month.
Clean Using the Cleaning Kit
!! IMPORTANT !!
Instruct users how to perform the cleaning so that they can do it rightly by themselves..
As cleaning is performed while the caps on the printing heads are detached, cleaning must be
completed before the heads dry out.
It is suggested that cleaning be completed in thirty minutes or less.
Other Cleaning Tasks
* Body
* Platen
* Grit rollers
* Pinch rollers (Raise the Pinch rollers when not in use.)
* Front cover
* Media Clamps
Explain the cleaning method for each part to the customer referring to the Users Manual.
Replace the Consumable parts
* Wiper
*Blade
*Separating Knife
Dispose of Discharged Ink
Explain about the time to discard the discharged ink in the Drain bottle.
Explain to switch off the sub power before performing to discard the discharged ink.
Explain to discard carefully the discharged ink from the Drain bottle so that the ink does not spatter.
7-11

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents