Roland VersaCamm SP-540V Service Notes page 152

Move the cap upward to the position that the cap
3
contacts exactly to the head, then press [ENTER] to
update the adjustment value.
-When you press [
direction in 0.25 mm unit.
-When you press [ ] key, the cap moves to the position in the
setting value -2.00 mm.
-When you press[ ] key, the adjustment value is not updated
and the capping is carried out and then exiting the menu.
Enter the [CHECK GAP.] menu in the [SERVICE
4
MODE] to check the cap adjustment value.
The cap moves to the same position as the CAP OPEN
SUCTION is performed. Check if there is the gap between the
cap and head.
[CHECK GAP.] is the menu to check the gap
between the caps and head. For adjustment, use
the [ADJUST POS.] menu.
] key, the cap moves to the upward
4-55
Head
Cap
4
Gap