17
Move the HEAD CARRIAGE by hand to the lock
position.
Be careful that the head does not strike the
media or media clamp.
18
Select [CAP&WIPER CTRL] > [CAP] > [UP], and press
the [ENTER] key to move up the capping unit 1 step.
Check that the GUIDEs at the two ends of the capping
unit align with the GUIDEs at the two ends of the head
carriage. Then press the [ENTER] key twice more to
cap the heads.
19
Fix I/S cover.
Enter the SERVICE MODE and perform the following
adjustments.
1. CAP HEIGHT CHECK
GUIDE
3-15
GUIDE
I/S COVER