Roland VersaCamm SP-540V Service Notes page 94

Remove TOOL CARRIAGE TOP COVER from the TOOL
9
CARRIAGE.
Disconnect the 3 cables except the FLEXIBLE CABLE
10
from the TOOL CARRIAGE BOARD, and remove the
TOOL CARRIAGE BOARD from the machine.
Remove the FLEXIBLE CABLE and the CABLE GUIDEs
11
from the TOOL CARRIAGE BOARD.
Connect the new FLEXIBLE CABLE to the TOOL
12
CARRIAGE BOARD. Then, fix the 2 new CABLE
GUIDEs with putting the FLEXIBLE CABLE between
them.
TOOL CARRIAGE TOP COVER
Turn over the board and fix
the CABLE GUIDEs with the
rivets.
3-49
TOOL CARRIAGE BOARD
CABLE
CABLE GUIDE