Roland VersaCamm SP-540V Service Notes page 135

Select [SCAN SETTING] from the [CROP-TOOL ADJ.]
4
menu and enter the correction-value found in the Test
Pattern.
4
Select [FEED SETTING] from the [CROP-TOOL ADJ.]
5
menu and enter the correction-value found in the Test
Pattern.
Select [TEST PRINT] under the [CROP-TOOL ADJ.]
6
menu.
Test Pattern will be printed and cut when the [ENTER]
key is pressed.
If the cutting line is shifted from the printed image, fine
7
adjust the error in Scan Direction and Feed Direction in
the step 4 and 5 .
SERVICE MENU
CROP-TOOL ADJ.
CROP-TOOL ADJ.
SCAN SETTING
SCAN SETTING
-0.40mm
SERVICE MENU
CROP-TOOL ADJ.
CROP-TOOL ADJ.
FEED SETTING
FEED SETTING
-0.15mm
SERVICE MENU
CROP-TOOL ADJ.
CROP-TOOL ADJ.
TEST PRINT
4-38
-0.40mm
[ENTER]
-0.23mm
[ENTER]
[ENTER]