Roland VersaCamm SP-540V Service Notes page 5

Turn off the primary power SWs
for the Printer and Dryer before
servicing.
About the Labels Affi xed to the Unit
These labels are affi xed to the body of this product.
The following fi gure describes the location.
Do not recharge, short-circuit,
disassemble the lithium battery, nor
put it into fi re.
It may cause heat, explosion and fi re.
Put tape around the lithium battery
for insulation for disposal or
preservation.
It may cause heat, explosion and fi re.
HIGH VOLTAGE,
HANDLING ATTENTION
• Do not touch during power on
Electric shock, Compornents damage
• Do not repair. Replace power unit.
• Do not replace fuse. Can not be recovered.
Electric charge.
Do not touch when power is on.
The wiring terminal untended for connection of the pro-
tective earthing conductor associated with the supply
wiring.
Do not disconnect the cable of this terminal except the
time of replacement.