Roland VersaCamm SP-540V Service Notes page 77

Connect the new INK TUBE to the JOINTs, and mark
13
the INK TUBE to indicate the color of the ink.
Cut the INK TUBE at appropriate length and connect it
14
to the INK DAMPER. Then mark the INK TUBE to
indicate the color of the ink.
Then, replace the other INK TUBEs in the same way.
15 Connect 2 FLEXIBLE CABLEs to the PRINT CARRIAGE
BOARD and put back the GUIDE PLATEs.
16 Move the HEAD CARRIAGE by hand to the lock
position.
Be careful that the head does not strike the
media or media clamp.
3-32
JOINTs
REAR VIEW OF MACHINE