Roland VersaCamm SP-540V Service Notes page 112

Other Factory Mode
SYSTEM PARAMETER INITIALIZE
[ ] , [ ] , [ ENTER ] + POWER ON
INITIALIZE ALL
SYS.PARAMETER
INITIALIZE
DISPLAYED LANGUAGE
AND UNIT
[ MENU ] + POWER ON
Roland SP-300
Ver.1.00
MENU LANGUAGE
ENGLISH
ENGLISH/JAPANESE
LENGTH UNIT
mm INCH
mm/INCH
TEMP. UNIT
C F
C/ F
The machine becomes on by turning the sub power switch
while pressing [
Initialize can be performed by pressing the [ENTER] key.
It can also be canceled by pressing the [POWER] key.
The power will be off automatically when initialize is completed.
It is necessary to do the LIMIT POSITION INITIALIZE after this operation.
The error message [SERVICE CALL 0101] will appear
COMPLETED
if you don't setup the LIMIT POSITION.
SERVICE REPORT_PRINTING
[ ] + POWER ON
SERVICE REPORT
SETUP SHEET
], [ ] and [ENTER] keys.
Turn on the sub power switch while
pressing [
Service Report can be printed on the A4
size media.
The printing will be performed in Black.
* Please print the [History Report] from
the Service Mode.
4-15
] key.
4