Roland VersaCamm SP-540V Service Notes page 177

Maintenance
Others
Exchange Time of the
Consumable Parts
When Moving the Unit
!! IMPORTANT !!
When you move the machine, you first clean the Head.
Cleaning of the heads requires 4 SOL INK cleaning cartridge.
Explain it is necessary to fill ink within 1 week after performing the HEAD WASH.
The nozzles of the Heads could be clogged if the machine is left for a long period after removing the ink.
Explain to switch off and on the machine and check the result before calling an engineer
when Service Call error occurs. There is a possibility to solve the problem.
Instruct users how to cap the Head.
Users need to cap the Head by themselves in case the Head does not return to the standby position
for some reason.
PARTS NAME
Printing Head
Wiper
Carriage Motor
Cap Top
Ink Tube
Pump Unit
Ink Tube
Sponge for Flushing
Ink Pad
(Pad under the Wiper Unit)
Battery
Cutter Protection
Pinch Roller
Exchange Time
6 billion shots / nozzle (6000000 kshots)
* When the Head is replaced, the Damper should be replaced
at the same time.
6 months or Wiping 3000 times or Ribbing 100 times
When the cleaning has been done for the 500 times, the message for
replacement of the Wiper will be shown on the LCD.
12 months or Sponge Hours : 1920 hours
When the printing has been performed for 1920h, the message for
replacement of the Ink Pad will be shown on the LCD.
Replace depending on scratches on the Cutter Protection.
Replace it if the rubber part is worn out.
7-12
2000 hours
6 months
2000 hours
50,000 times
2000 hours
6 months
24 months