Panasonic FP0 User Manual page 377

Error
Name
code
External memory
!64
error
!65 Protect error
!66 Address error
No program error
!67
and No data error
Rewrite during RUN
!68
error
!70 SIM over error
Exclusive access
!71
control error
An abnormality occurred when loading RAM to ROM/IC memory
card.There may be a problem with the ROM or IC memory card.
-When loading,the specified contents exceeded the capacity.
-Write error occurs.
-ROM or IC memory card is not installed.
-ROM or IC memory card does not conform to specifications
-ROM or IC memory card board is not installed.
A program or system register write operation was executed when
theb protect mode (password setting or DIP switch,etc.)or ROM
operation mode was being used.
There was an error in the code format of the address data.
Alsi.when exceeded or insufficient of address data,there was a
mistake in the range designation.
Cannot be read because there is no program in the program
area or the memory contains an error.Or,reading was attempted
of data that was not registered.
When inputting with programming tool software,editing of an
instruction (ED,SUB,RET,INT,IRET,SSTP,and STPE) that
cannot perform a rewrite during RUN is being attempted.
Nothing is written to the CPU.
Program area was exceeded during a program write process.
A command that cannot be processed was executed at the same
time as a command being processed.
Description
14-135