Panasonic FP0 User Manual page 278

Name Boolean
Shift register SR
Left/right F119
shift register (LRSR)
Control instructions
Master MC
control relay
Master MCE
control relay
end
Jump JP
Label LBL
Auxiliary F19
jump (SJP)
Label LBL
*1) In the FP2/FP2SH/FP10SH, when internal relay WR240 or higher is used, the number of steps is the
number in parentheses. Also, in the FP2/FP2SH/FP10SH, when the specified internal relay number
(word address) has an index modifier, the number of steps is the number in parentheses.
*2) In the FP2/FP2SH/FP10SH, when the number "n" in a jump instruction has an index modifier, the
number of steps is the number in parentheses.
14-36
Symbol
Shifts one bit of 16-bit [word internal relay (WR)] data to
the left.
Shifts one bit of 16-bit data range specified by "D1" and
"D2" to the left or to the right.
Starts the master control program.
Ends the master control program.
The program jumps to the label instruction and continues
from there.
The program jumps to the label instruction specified by "S"
and continues from there.
Description Steps
1 (2)
Note1)
5
2
2
2 (3)
Note2)
1
3
1