Panasonic FP0 User Manual page 258

FP0
Address
R9013 Initial on pulse relay
R9014 Initial off pulse relay
Step ladder initial on
R9015
pulse relay
R9016,
Not used
R9017
0.01 s clock pulse
R9018
relay
0.02 s clock pulse
R9019
relay
R901A 0.1 s clock pulse relay
R901B 0.2 s clock pulse relay
R901C 1 s clock pulse relay
R901D 2 s clock pulse relay
1 min clock pulse
R901E
relay
R901F Not used
R9020 RUN mode flag
R9021 to
Not used
R9025
R9026
Message flag
(*Note)
R9027
Remote mode flag
(*Note)
R9028 Not used
Note) Used by the system.
14-16
Name
Turns on only at the first scan in the operation.
Turns off from the second scan and maintains the off state.
Turns off only at the first scan in the operation.
Turns on from the second scan andmaintains the on state.
Turns on for an instant only in the first scan of the process
the moment step ladder process is opened.
-
Repeats on/off operations in 0.01 s
cycles.
Repeats on/off operations in 0.02 s
cycles.
Repeats on/off operations in 0.1 s
cycles.
Repeats on/off operations in 0.2 s
cycles.
Repeats on/off operations in 1 s
cycles.
Repeats on/off operations in 2 s
cycles.
Repeats on/off operations in 1 min
cycles.
-
Turns off while the mode selector is set to PROG.
Turns on while the mode selector is set to RUN.
-
Turns on while the F149 (MSG) instruction is executed.
Turns on while the mode selector is set to REMOTE.
-
Description