Wiring The Power Supply To The Control Unit - Panasonic FP0 User Manual

FP0
7.2

Wiring the Power Supply to the Control Unit

Use the power supply cable (AFP0581) that comes with the unit to connect the power
supply.
FP0 control unit
Item
Rated voltage
Operating voltage range
Notes
To minimize adverse effects from noise, twist the brown and
blue wires of the power supply cable.
To protect the system against erroneous voltage from the
power supply line, use an insulated power supply with an
internal protective circuit.
The regulator on the FP0 unit is a non-insulated type.
If using a power supply device without an internal protective
circuit, always make sure power is supplied to the unit
through a protective element such as a fuse.
7.2 Wiring the Power Supply to the Control Unit
Descriptions
24 V DC
21.6 to 26.4 V DC
Power supply
connector
Power supply
cable
(AFP0581)
Green:
Function earth
Blue: 0 V
Brown:
24 V DC
Wiring
next page
7 − 5