Table Of High-Level Instructions - Panasonic FP0 User Manual

14.3 Table of High-level Instructions

The high-level instructions are expressed by the prefixes "F" or "P" with numbers. For most of the high-
level instructions, "F" and "P" types are available. The differences between the two types are explained
as follows:
• Instructions with the prefix "F" are executed in every scan while its trigger is in the on.
• Instructions with the prefix "P" are executed only when the leading edge of its trigger is detected.
Num-
Name
ber
Data transfer instructions
F0 16-bit data
P0 move
F1 32-bit data
P1 move
F2 16-bit data
P2 invert and
move
F3 32-bit data
P3 invert and
move
F4 Reading of
P4 head word
No. of the
specified
slot
F5 Bit data
P5 move
F6 Hexadecimal
P6 digit (4-bit)
data move
F7 Two 16-bit
P7 data move
F8 Two 32-bit
P8 data move
F10 Block move
P10
14-62
Boolean Operand
MV S, D
PMV
DMV S, D
PDMV
MV S, D
PMV/
DMV/ S, D
PDMV/
GETS S, D
PGETS
BTM S, n, D
PBTM
DGT S, n, d
PDGT
MV2 S1, S2, D
PMV2
DMV2 S1, S2, D
PDMV2
BKMV S1, S2, D
PBKMV
Description
(S)→(D)
(S+1, S)→(D+1, D)
(S)→(D)
(S+1, S)→(D+1, D)
The head word No. of the specified slot is read.
The specified one bit in "S" is transferred to the
specified one bit in "D". The bit is specified by "n".
The specified one digit in "S" is transferred to the
specified one digit in "D". The digit is specified by
"n".
(S1)→(D),
(S2)→(D+1)
(S1+1, S1)→(D+1, D),
(S2+1, S2)→(D+3, D+2)
The data between "S1" and "S2" is transferred to
the area starting at "D".
Steps
5
7
5
7
5
7
7
7
11
7