Panasonic FP0 User Manual page 252

FP0
Add-
Item
ress
Input
401
setting
Note1) If the operation mode is set to 2-phase, individual, or direction differentiation, the setting for CH3
is invalid.
Note2) If reset input settings overlap, the setting of CH3 takes precedence.
Note3) If system register 400 to 403 have been set simultaneously for the same input relay, the following
precedence order is effective: [High-speed counter] '[Pulse catch]' [Interrupt input].
14-10
Name
Setting
High-
by
speed
progra-
counter
mming
mode
tool
settings
soft-
(X3 to X5)
ware
Default
value
Do not set X3 as high-speed counter.
2-phase input (X3, X4)
2-phase input (X3, X4),
Reset input (X5)
Incremental input (X3)
Do not
Incremental input (X3), Reset input (X5)
set X3
Decremental input (X3)
as high-
Decremental input (X3),
CH2
Reset input (X5)
speed
Individual input (X3, X4)
counter.
Individual input (X3, X4),
Reset input (X5)
Direction decision (X3, X4)
Direction decision (X3, X4),
Reset input (X5)
Do not
Do not set X4 as high-speed counter.
set X4
Incremental input (X4)
as high-
CH3 Incremental input (X4), Reset input (X5)
speed Decremental input (X4)
Decremental input (X4), Reset input (X5)
counter.
CH2/
H0
CH3
Descriptions