Table Of Basic Instructions - Panasonic FP0 User Manual

14.2 Table of Basic Instructions

Name Boolean
Sequence basic instructions
Start ST
Start Not ST/
Out OT
Not /
AND AN
AND Not AN/
OR OR
OR Not OR/
Leading ST↑
edge start
Trailing edge ST↓
start
Note1) In the FP2/FP2SH/FP10SH, when using X1280, Y1280, R1120 (special internal relay included),
L1280, T256, C256 or anything beyond for the ST, ST/, OT, AN, AN/, OR and OR/ instructions,
the number of steps is shown in parentheses. Also, in the FP2/FP2SH/FP10SH, when a relay
number has an index modifier, the number of steps is shown in parentheses.
14-28
Symbol
Begins a logic operation with a Form A (normally open)
contact.
Begins a logic operation with a Form B (normally closed)
contact.
Outputs the operated result to the specified output.
Inverts the operated result up to this instruction.
Connects a Form A (normally open) contact serially.
Connects a Form B (normally closed) contact serially.
Connects a Form A (normally open) contact in parallel.
Connects a Form B (normally closed) contact in parallel.
Begins a logic operation only for one scan when the
leading edge of the trigger is detected.
Begins a logic operation only for one scan when the trailing
edge of the trigger is detected.
Description
Steps
Note1)
1 (2)
1 (2)
1 (2)
1
1 (2)
1 (2)
1 (2)
1 (2)
2
2