Panasonic FP0 User Manual page 133

FP0
When tightening the RS232C port, use a screwdriver (Phoenix Contact Co., Product no.
1205037) with a blade size of 0.4 × 2.5. The tightening torque should be 0.22 to 0.25
N⋅m (2.3 to 2.5 kgf⋅cm) or less.
Procedure:
1. Remove a portion of the wire's insulation.
7 mm/0.276 in.
2. Insert wire into the RS232C port until it contacts the
back of the RS232C port.
3. Tighten the screw clockwise to fix the wire in place.
Clockwise
7.9 Wiring the RS232C Port
Suitable wire
RS232C port
Suitable wire
Wiring
7 − 21