Auto-Cutter Assembly - Epson TM-U950 Technical Manual

CONFIDENTIAL
Stamp operation
When the stamp solenoid is powered, the ferrite core moves in the
core serves as the pivot for the stamp drive lever, the lever rotates in the
the linked stamp lever to move in the
the lever also moves in the
stamping the paper. When the stamp solenoid goes off, the force of the stamp drive lever spring
returns the stamp to its original position.

Auto-cutter Assembly

The auto-cutter assembly consists of the transmission mechanism, sensor, and cutter. For easy
maintenance and paper removal, this assembly can be completely opened. For the sensor, see
auto-cutter sensor assembly on page 2-6.
2-20 Mechanism Configuration and Operating Principles
direction. Therefore, the stamp assembly attached to
direction and is pushed up against the upper paper guide, thus
Figure 2-31. Stamp Operation
Figure 2-32. Auto-cutter Assembly
direction. Since the ferrite
direction, causing
Rev. A