Adjusting The Auto Cutter Blade - Epson TM-U220-i Technical Reference Manual

Adjusting the Auto cutter blade

The auto cutter blade may lock up without returning to the standby position as a result of a paper
clip or other object entering inside the printer or a paper jam. Turn off the printer, wait 10 seconds,
and then turn the printer back on. The auto cutter blade should automatically return to the correct
position.
If it does not, follow the steps below to manually return the auto cutter blade to the correct position.
1
Turn off the printer.
2
Open the roll paper cover.
3
Turn the knob in the direction of the arrow until you see a shaft in the open-
ing.
4
Close the roll paper cover.
Knob
Chapter 4
Shaft
Handling
4
135