Connectors; Interface - Epson TM-U950 Technical Manual

CONFIDENTIAL
MICR Reader (when the printer is used with the MICR reader)
(Not available for the TM-U950P)
Available fonts:
Recognition rating:
Recognition rating is defined as follows:
Recognition rating (%) =
Check paper used for test is EPSON standard check paper. Checks must be flat, without curls,
folds, or wrinkles.

Connectors

All connectors are located on the rear panel of the printer. (Refer to Figure 1-1.)
Connector panels
1
Customer display
(DM-D) connector

Interface

See the Interface section in this chapter.
Power supply connector
This connector is for the AC adapter.
Connector type:
Table 1-4. Power Supply Pin Assignment
Pin number
1
2
3
Shell
Note:
Be sure to ground the printer via the frame ground terminal on the metal strip on the rear panel.
Rev. A
Total number of checks - (number of sheets misread
14 25
8
1 13
Interface Drawer kick-
connector
out connector
TM-U950
E-13B, CMC7
98% or more (at 25
and those not identified)
Total number of checks
2
6
1
1
3
Interface connector
Power
connector
Figure 1-14. Rear Panel Connectors
TCS7960-53-2010 (Hoshiden) or equivalent
Function
24 VDC
Signal ground
NC
Frame ground
TM-U950/U950P Technical Manual
C)
°
Drawer kickout
connector
TM-U950P
Features and General Specifications 1-17
× 100
Power connector