Main Assembly (Part 2) - Epson TM-U950 Technical Manual

CONFIDENTIAL

Main Assembly (Part 2)

Main Assembly 2-1: Attaching lever stop plates-J and -R and adjusting their positions (for
printers with a MICR reader)
Always adjust the following items before carrying out the assembly: (See pages 5-53 - 58.)
1. As shown in the illustration below, attach the lever stop plates-J and -R, securing each
Rev. A
Check the auto cutter blade for looseness. Adjustment A.
Adjust the backlash between the carriage motor gear and the carriage feed slip.
Adjustment B.
Adjust the slip paper guide. Adjustment C.
Adjust the tension of the carriage transmission belt. Adjustment D.
Adjust the parallelism of the slip paper feed. Adjustment E.
Adjust the gap between the print head unit and the platen assembly. Adjustment F.
temporarily with one screw.
TM-U950/U950P Technical Manual
Disassembly, Assembly, and Adjustments 5-59