Epson TM-U950 Technical Manual page 58

CONFIDENTIAL
Slip paper positioning operation
A form stopper placed at a right angle in the slip paper path blocks the path due to the action of
the form stopper spring (Figure 2-21).
When the slip paper is inserted along the slip paper guide (lower) in the
can enter as far as the stopper (Figure 2-21).
Next, the J/S switching solenoid is powered while rotating the journal paper feed motor several
steps in the forward and backward directions. The J/S change lever now causes the J/S
switching gear, which has been positioned to feed the journal paper up to this point, to move to
a position to feed the slip paper. The auxiliary slip paper feed solenoid is then powered, causing
the auxiliary slip paper feed shaft lever linked to the ferrite core to move in the
The roller of the auxiliary slip paper feed roller is pushed up against the auxiliary slip paper
holder roller. The auxiliary slip paper feed shaft lever moves the form stopper in the
b
feeding (Figure 2-21).
The journal paper feed motor now rotates a certain number of steps (depending on the slip
paper format) in the
paper holder roller, slip paper feed belt, auxiliary slip paper holder roller, and auxiliary slip
paper feed roller to move in turn and thus bring the slip paper into the printing position (Figure
2-23).
Immediately before the operating sequence described above, the head carriage is moved to the
right most position. When positioning is completed, the auxiliary slip paper feed solenoid is
turned off, and the J/S switching solenoid is set to hold (during slip paper printing and paper
feeding).
Rev. A
direction, thus opening the slip paper path and completing the preparations for slip paper
direction, causing the J/S switching gear, paper feed reduction gear, slip
Figure 2-21. Slip Paper Positioning (1)
TM-U950/U950P Technical Manual
Mechanism Configuration and Operating Principles 2-13
direction, the paper
direction.
a