Epson TM-U950 Technical Manual page 179

CONFIDENTIAL
Main Assembly 1-1-(2):
1.* Mount the screw in hole
2. Attach the frame-inner assembly and secure it with the screw.
3. Attach the motor-paper feed-J assembly (the larger assembly) and R assembly (the smaller
4.* Fit the shaft holder-slip feed roller into the groove
5. Mount the detector-slip paper insertion assembly and fasten it with the screw.
Rev. A
Frame-Main Unit Assembly (for printers with a MICR reader)
assembly), and secure them with the screws.
assembly, and secure it with the RE fittings.
Checkpoints
Be careful that the motor-paper feed-J and R assemblies are attached correctly.
Make sure that section
c
Checkpoint on page 5-35.)
Roller-slip paper feed assembly B
.
a
on the frame-inner is properly seated. (For details see the
Frame-inner assembly
Detector-slip paper insertion assembly
Disassembly, Assembly, and Adjustments 5-41
TM-U950/U950P Technical Manual
, attach the roller-slip paper feed
b
Motor-paper feed-J assembly
Frame-main assembly