Printer Mechanism Unit Assembly - Epson TM-U950 Technical Manual

CONFIDENTIAL

Printer Mechanism Unit Assembly

The assembly process is divided into sub-assembly and main assembly.
Perform the sub-assembly first to construct each unit from the parts. Then proceed to the main
assembly.
When assembling the printer, check each part and its attachment position by referring to the
exploded diagrams in Chapter 6.
An asterisk after a step number (such as 2.*) indicates that lubrication must be performed.
Lubricants should be applied when assembling the parts, since it is difficult to do so afterwards.
Perform lubrication by referring to the lubrication section at the end of Chapter 6.
For adjustments, follow the descriptions in the Adjustments sections in this chapter. Whenever
disassembly is performed even for just one part, check whether adjustment is necessary before
assembly.
All illustrations show the printer with a MICR reader installed, unless marked "Without MICR
reader."
5-6 Disassembly, Assembly, and Adjustments Rev. A