CONFIDENTIAL
Main Assembly 1-6: Wiring, and Frame-Rear and Connector Assembly-N.E.
Detector Mounting
1. Dress the wires as shown in the illustration.
2. Attach the frame-rear to the frame-main assembly and secure it with the screw.
3. Pass the connector assembly-N.E. detector-J through hole
4. Pass the connector assembly-N.E. detector-R through hole
Checkpoint
Make sure not to mix up the J and R connector cables.
Connector assembly-N.E. detector-J
5-46 Disassembly, Assembly, and Adjustments
(orange cable)
and then hole
.
a
b
and then hole
.
c
d
Connector assembly-N.E. detector-R
(purple cable)
Rev. A