Sub-Assembly N: Detector-Slip Insertion Assembly; Sub-Assembly O: Solenoid J/S Changeover Assembly - Epson TM-U950 Technical Manual

CONFIDENTIAL

Sub-assembly N: Detector-Slip Insertion Assembly

1. Push the detector-slip insertion sub assembly into the holder-slip insertion detector.

Sub-assembly O: Solenoid J/S Changeover Assembly

1.* Attach the J/S changeover solenoid to the J/S changeover solenoid mount plate and tighten
the screw.
2. Align the U-shaped groove of the lever-J/S changeover with the groove on the side of the
J/S changeover solenoid and attach the lever by joining sections
3. Engage the J/S changeover lever spring.
5-36 Disassembly, Assembly, and Adjustments
Detector-slip insertion sub-assembly
and .
a
b
Rev. A