CONFIDENTIAL
*Note
When the printer uses an MICR reader, this width is 5.0mm (0.20").
Paper Roll Feed Mechanism
Feed principle
Drop-in loading
Paper roll near-end detection
Separate sensors for receipt paper and journal paper.
Journal Paper Take-up Mechanism
Automatic take-up by journal paper feed motor.
Auto-cutter
Auto-cutter is installed only on receipt side, for full and partial cuts.
Electrical Specifications
Printer operation voltage (using supplied AC adapter)
+24 V DC ± 10%
Ripple voltage: 300 mVpp or less (only when the printer is used with the MICR reader)
Current consumption
Rev. A
Slip paper
Figure 1-8. Slip Paper Print Area
During printing
Average approx. 1.8 A
(R/J, α - N, 40-character printing)
Peak approx. 8 A
During slip paper feed to printing position:
Average approx. 0.3 A (for approx. 1.4s)
TM-U950/U950P Technical Manual
Features and General Specifications 1-9