CONFIDENTIAL
Main Assembly (Part 1)
Main Assembly 1-1: Frame-Main Unit Assembly
1.* Mount the screw in hole
2. Attach the frame-inner assembly and secure it with the screw.
3. Mount the motor-paper feed-J (larger motor) and motor-paper feed-R and secure them with
the screws.
4.* Insert the print shaft holder (shaft holder-slip feed roller for printers with a MICR reader) in
groove
RE.
5. Mount the detector-slip paper insertion assembly and fasten it with the screw.
Checkpoints
Make sure not to mix up the paper feed motors.
Make sure that section
Checkpoint on page 5-35.)
5-40 Disassembly, Assembly, and Adjustments
.
a
, mount the roller-slip paper feed assembly on the holder, and fasten it with the
b
on the frame-inner is properly seated. (For the details see the
c
(shaft holder-slip feed roller)
Roller-slip paper feed assembly
Frame-inner assembly
Detector-slip paper insertion assembly
Frame-main assembly
Rev. A