CONFIDENTIAL
Adjustments
When servicing or repairing the printer and after replacing any parts, be sure to perform the
following adjustments to assure correct operation.
Adjustment A: Auto-cutter Blade Play
1. Move the cutter blade so that the short cutouts on the blade just disappear when seen from
2. Insert tweezers into the long cutout of the blade and verify that there is sufficient play left
3. If there is no play, there must be more than one blade sticking together. Disassemble the
Rev. A
the hole on the cover-cutter blade receiving assembly.
and right.
auto-cutter unit and separate the blades.
Cover-cutter blade
receiving assembly
TM-U950/U950P Technical Manual
Disassembly, Assembly, and Adjustments 5-53