VISTA-10SEa Installation and Setup Guide
Remote Keypads
You may use up to 4 of any of the following keypads:
•
Fixed-Word Keypads: 6128, 6128RF, and 6137 (fixed-word display).
•
Alpha Keypad:
If you will be programming from a keypad, you must connect a 6139 2-line alpha keypad. (It need
not stay in the system.)
Security Codes
•
One Master code for entire system (User 2). Installer code is user 1.
•
Up to 4 Secondary User codes (for Users 3–6). If you are not using a Duress code, User
code 8 is available for an additional user.
•
One Duress code (User 8), which, when used to disarm or arm the system, will send a
silent Duress message to the central station.
Keypad Panic Keys
•
Up to 3 programmable Panic key functions are provided, designated as Zones 7, 95, 96.
•
Activated by wired and wireless keypads.
•
Reported separately, distinguished by subscriber ID number.
Quick Arm Feature
•
Quick Arm may be programmed, allowing use of the [#] key in place of the security code
for arming (Quick Arm will not work unless the Master code has been programmed in the
system).
Optional Output Relays
•
Up to 4 relays using one ADEMCO 4204 Relay Module.
•
Up to 2 relays using one ADEMCO 4229 Zone Expansion/Relay Module.
•
Actions programmable to respond to zone activity or manual keypad entries.
Optional Phone Module
•
Supports the 4285/4286 Phone Module.
•
Provides access to the system via on-premises or off-premises phones for arming,
disarming, etc., plus control of relay outputs.
•
4286 also provides remote temperature control of the premises using the 4500
thermostat.
Alarm Output
•
Provides a 12VDC, 2A output that can drive the alarm sounders (assumes a fully charged
battery is connected).
•
Steady output for Burglary/Panic, or temporal pulse sounding output for Fire
notification.
1-2
Wireless Expansion Table
Receiver Model
No. of Zones
5881L
Up to 8
5881M
Up to 16
5881H
Up to 16
6139 (2-line alphanumeric display).