01 Zn to Delete?
(00 = Quit)
00
NOTES:
•
Any list may include any or all of the system's zone numbers.
•
A zone list can be assigned to more than one output relay.
•
If you only want to review what has been programmed previously, enter [#]81. The review
can be advanced by using the [ ] key.
When you are finished, enter 00[ ] to quit. No programmed values can be changed in this
mode.
When you have completed programming in 80 and 81 Interactive menu modes,
exit the programming mode by keying 99.
Enter each zone to be deleted from the list, followed by [ ].
After all zones to be deleted are entered, enter 00 to return to
the first screen so that another list can be programmed, if
desired.
Section 7: Relay Outputs
7-7