ADEMCO Vista-10SEa Installation And Setup Manual page 7

to the system at a later time (e.g., adding wireless zones, adding a 4285 Phone Module, etc.).
Without an understanding of the programming method for this system, you will not be able
to successfully perform the required programming. Before any programming is attempted,
we therefore urge you to read the "Mechanics of Programming" and the "Data Field
Descriptions" in the separate Programming Guide that has been supplied.
If you are an experienced user of ADEMCO products, you may choose to wire and then
program the entire system at one time. If so, refer to "Mechanics of Programming" and "Data
Field Descriptions" in the separate Programming Guide after the hardware setup is
complete. The Programming Guide contains all of the information you will need to program
the system (including a blank Programming Form), except for detailed programming for
basic wired zones 1–6, wired expansion zones, and wireless zones, which are contained in the
following sections in this manual: BASIC WIRED ZONES 1–6, WIRED EXPANSION
ZONES, and WIRELESS (RF) ZONE EXPANSION (5800 RF SYSTEMS).
This manual uses various icons to denote critical notes and technical tips to assist you with
the installation of this system (see next page).
v