ADEMCO Vista-10SEa Installation And Setup Manual page 68

VISTA-10SEa Installation and Setup Guide
to the right, in position for the next character.
5. Repeat steps 3 and 4 above to create the desired word(s). Note that the [4] key can be
used to move the cursor to the left, if necessary. Remember, no word or word-string can
exceed 10 characters.
6. Press 8 to save the custom word(s) and return to the "Custom Word?" prompt.
7. Repeat steps 2–5 for other custom words to be entered. To change a custom word, just
overwrite it.
8. When you are finished entering words, press 0 (No) at the "Custom Word?" prompt to
return to the Descriptor entry. The custom word(s) will be automatically added to the
built-in vocabulary.
9. Exit the Programming mode by keying 99.
When you are entering zone descriptors as described in step 6 of "Programming the
Descriptors," the custom word numbers are 250 to 254 for words 1 to 5, respectively.
11-4