ADEMCO Vista-10SEa Installation And Setup Manual page 38

Vista-10sea
Hide thumbs Also See for Vista-10SEa:
Table of Contents

Advertisement

VISTA-10SEa Installation and Setup Guide
Model
Product
5816TEMP
Low-Temperature
Sensor
5817
Multi-Point Universal
Transmitter
5819
Shock Processor
Transmitter
5819WHS
Shock Processor
5819BRS
Transmitter
5827
Wireless Keypad
5827BD
Wireless Two-Way
Keypad
(used with 5800TM)
5849
Glassbreak Detector
5850
Glassbreak Detector
6-6
Compatible 5800 Series Transmitters Table (Continued)
Enter as Input
Device Type
House ID
House ID
Description
RF
Transmits a fault condition when temperature
drops below 7°C.
RF
Has three unique input (loop) codes: one for a
"Primary" contact loop with programmable
options; the others for two "Auxiliary" closed
circuit contact loops.
- Connects to externally mounted inertia-type
RF
shock detector (not supplied).
- Has built-in tamper cover switch.
- Has 3 unique input (loop) codes:
Loop 1: Terminals for a wired, N.C. sensor loop.
Loop 2: For a closed-circuit contact loop using
the built-in reed switch in conjunction with a
magnet.
Loop 3: Terminals for a wired, closed-circuit
contact loop.
- Has built-in shock sensor.
RF
- Has built-in tampered cover switch.
- Has 3 unique input (loop) codes:
Loop 1: Built-in shock sensor loop wired to TB1
(normally closed).
Loop 2: For a closed-circuit contact loop using
the built-in reed switch in conjunction with a
magnet.
Loop 3: Externally wired, closed-circuit contact
loop connected to TB2.
- Can be used to turn the burglary protection on
and off.
- Features the same built-in panic functions as
wired keypads.
- The keypad is identified as zone "00" on wired
keypads when it transmits a low battery.
- Operates the system similarly to wired keypads.
- Can indicate system status via its 3 LEDs and
sounder.
- Includes 3 panic keys.
- House ID must be set.
- Requires 5800TM Transmitter Module.
RF
Requires both sound and low-pressure flex wave
of pre-breaking glass to cause alarm to be
transmitted.
Requires both sound and low-pressure flex wave
RF
of pre-breaking glass to cause alarm to be
transmitted.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents