ADEMCO Vista-10SEa Installation And Setup Manual page 94

VISTA-10SEa Installation and Setup Guide
6139 Remote Keypad
1. Physical: (129mm W x 162mm H x 45mm D).
2. Electrical:
3. Interface Wiring: Same as 6128EX, except uses a colour-coded wire loom.
5881L, 5881M, 5881H RF Receivers (5800 System)
1. Physical: 188mm W x 112mm H x 37mm D.
NOTE: 277mm H with antenna.
2. Electrical:
3. Interface Wiring: Same as 6128EX, except uses a colour-coded wire loom.
4. Range: 60m nominal indoors from wireless transmitters
5. Zones: 5881L: accepts up to 8 transmitters.
5800TM Transmitter Module (used with 5827BD Wireless 2-Way Keypad and 5804BD Wireless 2-
Way RF Key)
1. Physical: 57mm W x 105mm H x 22mm D).
2. Electrical:
3. Interface Wiring: Same as 6128EX.
4204 Relay Module
1. Physical: 169mm W x 108mm H x 32mm D).
2. Electrical:
3. Interface Wiring: Same as 6128EX.
4. Four Output Relays: SPDT Contacts. Rating: 2A max at 28VDC/AC.
4219 Wired Expansion Module
1. Physical: 169mm W x 108mm H x 32mm D.
2. Electrical:
3. Interface Wiring: Same as 6128EX.
4. Four Output Relays: SPDT Contacts. Rating: 2A max at 28VDC/AC.
4229 Wired Expansion /Relay Module
1. Physical: 169mm W x 108mm H x 32mm D).
2. Electrical:
3. Interface Wiring: Same as 6128EX.
17-2
Voltage Input: 12VDC.
Current Drain: 100mA.
Voltage Input: 12VDC.
Current Drain: 35mA.
(the actual range to be determined with system in Test mode).
5881M: accepts up to 16 transmitters.
5881H: accepts up to 16 transmitters.
Voltage Input: 12VDC.
Current Drain: 20mA.
Voltage Input: 12VDC.
Current Drain: 15mA (Relays off), 180mA (Relays on).
Voltage Input: 12VDC.
Current Drain: 35mA.
Voltage Input: 12VDC.
Current Drain: 35mA (Relays off), 100mA (Relays on).