Cleaning All Print Heads - Roland VersaUV LEF2-200 User Manual

Cleaning All Print Heads

In this operation, all inks within the printer are discharged, and the interior is cleaned. Ink is refilled after cleaning.
This operation requires six unused SOL INK cleaning cartridges (four for cleaning and two for refilling ink). Have
these on hand before you start.
The effect on white ink, gloss ink and primer is the same as
want to perform maintenance only on white ink, gloss ink, and primer, see
.
Ink(P. 153)
IMPORTANT
• All ink is discharged in this operation. Perform this operation only when ink emission failures (such as dot drop-out) cannot be im-
proved even after performing "normal," "medium," "powerful," and "manual" cleaning.
• Be sure to use SOL INK cleaning cartridges. Use of any other type may result in breakdown.
• Fill the machine with ink as soon as possible after cleaning is finished. Allowing the machine to stand without ink may damage the
print heads.
Procedure
1.
Press [MENU].
2.
Press [▼] to display the screen shown below.
MENU
SUB MENU
3.
Press [▶] once, and then press [▼] several times to display the screen shown below.
SUB MENU
INK CONTROL
4.
Press [▶] once, and then press [▼] several times to display the screen shown below.
INK CONTROL
HEAD WASH
5.
Press [ENTER].
6.
Press [ENTER] when the following screen appears.
CLEANING LIQUID
IS REQUIRED
7.
Make sure the cleaning liquid is ready.
8.
When the following screen is displayed, open the panel cover.
OPEN PANEL
COVER
Handling Severe Dot Drop-out
Handling Severe Dot Drop-out with Spot Color Ink(P. 153)
Handling Severe Dot Drop-out with Spot Color
3. Advanced Maintenance
. If you
157