Manual Cleaning Of Print Head - Roland VersaArt RA-640 User Manual

Maintenance that Should Be Performed More Than Once a Month

Manual Cleaning of Print Head

Important Notes on This Procedure
 Before attempting this operation, remove any media.
 To prevent the heads from drying out, finish this procedure in 30 minutes or less. A warning beep
sounds after 30 minutes.
 Never use any implement other than the included cleaning stick. Cotton swabs or other lintproduc-
ing items may damage the heads. If you use up the cleaning stick, purchase a new one from your
authorized Roland DG Corp. dealer.
 Cleaning liquid is not supplied. Please purchase it from your dealer or from us.
3
 Never immerse a cleaning stick that has already been used to perform cleaning in the cleaning
liquid. Doing so may degrade the cleaning liquid.
 Do not put the cleaning stick used for cleaning into the cleaning fluid. It will deteriorate the fluid.
 Never rub the nozzle surface of the print head.
 Stroke the sponges very gently, applying as little pressure as possible. Never rub, scrape, or crush
them.
When a warning beep sounds during cleaning
A warning beep sounds in 30 minutes after the operation is started. At this time, stop work, and follow
the procedure in step. 4 on page 69 to attach cover L and cover R, then close the front cover. Press
CAUTION
1.
Change to the print-head manual-cleaning menu.

Remove any media.

Press

MENU
SUB MENU

SUB MENU
MAINTENANCE

MAINTENANCE
CLEANING
66
to quit the manual-cleaning menu. After that, restart the procedure from the beginning.
Be sure to perform operations as specified by the instructions above,
and never touch any area not specified in the instructions.
Sudden movement of the machine may cause injury.
.
Press
the left appears.
Press
Press
Press
several times until the screen shown on
, and then .
.
.