2-4 Starting Printing
Getting Ready to Receive Data from a Computer
When you have finished loading media and making the temperature settings for the heating devices, then follow
the steps below. This procedure enables the machine to receive data from the computer and perform printing.
Procedure
Close the front cover.
Press
Wait until the
Wait for the dryer to warm up.
Make sure you are at the top menu.
If you are not at the top menu, press
Printing Is Not Possible in These Situations
The machine does not run when the front cover is open. Also, never open it when printing is in progress.
Doing so interrupts printing.
Data from the computer is not accepted when
Printing does not start until
Data from the computer is not accepted when you are not at the top menu.
Downloaded From ManualsPrinter.com Manuals
(making the light come on).
light stops flashing and stays steadily lit.
Top menu
W 2600 mm
light does not come on when media is loaded incorrectly.
, then press
Flashing
Steadily lighted
light is dark.
light comes on.
.
Steadily lighted
Chapter 2 Operation
43