Starting Printing; Getting Ready To Receive Data From A Computer - Roland Hi-Fi Express FP-740 User Manual

2-3 Starting Printing

Getting Ready to Receive Data from a Computer

When you have finished loading media, then follow the steps below. This procedure enables the machine to receive
data from the computer and perform printing.
Procedure
Close the front cover.
Press
Make sure you are at the top menu.
If you are not at the top menu, press
Printing Is Not Possible in These Situation
The machine does not run when the front cover is open. Also, never open it when printing is in progress.
Doing so interrupts printing.
Data from the computer is not accepted when
does not light up when media is loaded incorrectly.
Data from the computer is not accepted when you are not at the top menu.
Adjusting Head Height to Match Media Thickness
Depending on the media, media may wrinkle or come loose from the platen during printing, increasing the chance of
contact with the print heads. When you are using such media, adjust the head height to "HIGH."
p 72 "Adjusting Head Height to Match Media Thickness"
42 Chapter 2 Operation
(making the light come on).
Top menu
W 1839 mm
, then press .
Steadily lighted
SET UP
is dark.