Loading Custom Sets Or Factory Default Values - IBM 6400 Setup Manual

Chapter 3

Loading Custom Sets Or Factory Default Values

Loading Custom Sets Or Factory Default Values
Configuration
Management
Recall Save Current
Custom Set Values
Factory Default*
Custom Set 1
Custom Set 2
Custom Set 3
Custom Set 4
Custom/Preloaded Set 5
Custom/Preloaded Set 6
Custom/Preloaded Set 7
Custom/Preloaded Set 8
You can load any of the custom set configurations or the factory default
configuration. Factory default parameters are shown starting on page 94. The
loaded configuration remains active as long as the printer is on. The following
procedure shows how to load factory defaults to the printer.
If you power off the printer, the power-on configuration will load the next time
the printer is powered on. Selecting the power-on configuration is explained
on page 106.
Step Key
1. Press
Stop
2.
+
Scroll↑ Scroll↓
3.
Menu
104
Delete Change
Custom Set Power On Set
LCD Results
NOT READY
OPERATOR MENU
UNLOCKED
OPERATOR MENU
PRINTER CONTROL
* = Factory Default
Protect Print Custom
Set Values
Custom Sets
Notes
Places the printer in NOT
READY mode.
Unlocks the Operator Menu,
which allows you to make
configuration changes.
Displays the first Configuration
Main Menu option, PRINTER
CONTROL.