IBM 6400 Setup Manual page 62

Chapter 2
Connect The Interface And Power Cables (Cabinet Models)
Cable
Connector
7. Pull the cable up through the notch until it reaches the I/O plate.
8. Attach the cable connector to the printer I/O connector.
9. Secure the cable to the printer using the two cable standoffs.
10. Open the cabinet front door and cut the strap that secures the box, which
contains the power cord, printer ribbon, control panel overlay labels, and
documentation.
11. Open the box and remove the power cord, overlays, and documentation.
62
I/O Connector
Figure 33. Cable Connector Attachment
Strap
Figure 34. Unpacking Printer Accessories
I/O Plate