IBM 6400 Setup Manual page 111

(1)
NOTE: The Twinax and Coax interface menus only appear in the menus if
the IBM Coax/Twinax feature is installed.
(2)
The Early Print Complete option appears in the Twinax menu only
if the IPDS feature is installed.
(3)
IPDS, Code V Emulation, and IGP Emulation options appear in the
menus only if these features are installed. Menus are shown in
Appendix D.
(4)
Ethernet information only appears when the ethernet feature is
installed.
(5)
Ether the Ethernet Interface menu or the Parallel Interface menu
will display. They cannot display at the same time.
(6)
If installed.
(7)
Not if 4234-12 is running IPDS code.
(8)
Only if Autoswitching is enabled.
(9)
Only if Coax Emulation is enabled.
111