Release The Paper Chains (Cabinet Model) - IBM 6400 Setup Manual

Chapter 2
Remove Shipping Restraints (Cabinet Model)

Release The Paper Chains (Cabinet Model)

Tie Wraps (2)
NOTE: If you have the power paper stacker installed, skip this procedure and
1. Open the cabinet rear door.
2. Cut the tie wraps and release the paper chains from the bags at the top
rear of the printer frame. Remove the tie wraps and bags.
3. Make sure each chain hangs freely with no kinks or knots.
46
Figure 13. Releasing the Paper Chains
go to "Remove The Shipping Restraints From The Power Paper
Stacker" on page 48.
Paper Chains (8)
Bags (2)