IBM 6400 Setup Manual page 137

•
Report Status. When this option is enabled, faults are reported even if
the fault is not on the current active port. If the option is disabled, a fault
on the printer is reported only if it occurs on the active ports.
Hex Print Mode
When enabled, the HEX PRINT MODE parameter prints the EBCDIC data
and control codes received from the host as hex values. Refer to page to
obtain a hex code printout. Disable is the default condition.
NOTE: Printing in Hex Mode may alter print attributes set by the host
computer. A power cycle may be required after changing HEX PRINT
MODE from enable to disable.
137