•
Data Bit 8
•
Enable. (the default.) The PI line is not passed directly from host to
printer; all 8 bits are used for data bits, and characters in the 80-FF
hex range can be accessed.
•
Disable. When the host PI line is enabled, indicates PI line status. To
use the PI line, disable data bit 8, and enable the Host PI
configuration option.
NOTE: Data bit 8 is interpreted as either data bit 8 or PI signal, but never
both. When enabled as data bit 8, data bit 8 has priority over the PI
signal, and all data above 7F hex is used to access character data
and not to interpret PI line data.
Conversely, when data bit 8 is disabled and the PI signal is used,
data bit 8 of the data is reserved for use as the PI function, and you
cannot access characters in the 80-FF hex range. Therefore, to
access characters in the 80-FF hex range, data bit 8 must be
enabled.
Font Set
This parameter allows you to select a font for the Code V feature. Valid
selections are 0 to 32. The following predefined values are available:
0
U.S. ASCII (the default)
1
German
2
Swedish
3
Danish
4
Norwegian
5
Finnish
6
English
7
Dutch
8
French
9
Spanish
10
Italian
11
Turkish
12
Japanese
13-23
Reserved
24-31
User Defined Sets
32
0858 PC Euro Multilingual
33
0923 Latin 9 8859-15 Euro
PI Control
•
Printer PI
•
Disable. (the default.) Does not inform the Code V that the ASCII
emulation is configured with the PI line enabled.
•
Enable. Informs the Code V that the ASCII emulation is configured
with the PI line enabled.
Code V Configuration Menu
173