IBM 6400 Setup Manual page 119

•
Custom/Preloaded Set 5
function like a Printronix printer. This custom set contains ASCII
emulations used by Printronix compatible printers along with initial
defaults (Overstrike, Auto LF, etc.). The initial ASCII default emulation is
P-Series which may need to be altered for P-Series XQ or Serial Matrix in
some applications. For more information, refer to the Configuration Utility
Diskette shipped with this printer, or the 6400 ASCII Programmer's
Reference Manual.
•
Custom/Preloaded Set 6
printer using a set of Epson and Proprinter default values. This could be
useful when the printer has the Coax/Twinax feature, but is sometimes
run as an ASCII printer. Refer to the 6400 Coax/Twinax Programmer's
Reference Manual for more information.
•
Custom/Preloaded Set 7
without IPDS. This could be useful when the printer contains the IPDS
feature, but must occasionally be used as a non-IPDS printer. Refer to the
6400 IPDS Programmer's Reference Manual or the 6400 Coax/Twinax
Programmer's Reference Manual for more information.
Save Current Values
This option allows you to save your custom sets to meet different print job
requirements. This eliminates the need to change the parameter settings for
each new job.
The custom sets are stored in NVRAM—they will not be lost if you power off
the printer.
Factory default is a factory–preset custom set; it cannot be changed or saved.
IMPORTANT
A new custom set will overwrite an existing custom set if the PROTECT
CUSTOM SETS parameter is disabled (e.g., a new Custom Set 4 will
overwrite an existing Custom Set 4). See the "Protect Custom Sets" in
this section.
Delete Custom Set
You can delete one or all of your customized or preloaded custom sets.
Factory default is a factory–preset custom set and cannot be changed or
deleted.
Change Power On Set
You can specify which of the custom sets will be the power-on custom set.
The printer will power on with the factory set values or with one of the
customized configurations.
is used when configuring this printer to
contains the default settings for an ASCII
contains default settings for a Twinax printer
119